Filamentum PLA Silky Rainbow imprimentis tridimensionalis
Specificatio
• Superficies pulchra et nitida.
• Superficies nitida et textura serici similis levis.
• 100% biodegradabile et ab FDA ad salutem cibariam approbatum.
• Ratio contractionis materiae humilis, diameter uniformis.
• Eleganter involutum, bene dissolvendum, uniformiter et constanter alimentandum sine obstructione rostri vel extruderis.
Proprietates Producti
| Nota | Torwell |
| Materia | Polymeri compositi PLA margaritacei (NatureWorks 4032D) |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Pondus netum | 1 kg/volumen; 250 g/volumen; 500 g/volumen; 3 kg/volumen; 5 kg/volumen; 10 kg/volumen |
| Pondus grossum | 1.2 kg/volumen |
| Tolerantia | ± 0.03mm |
| Longitudo | 1.75mm (1kg) = 325m |
| Ambitus Reponendi | Sicca et ventilata |
| Siccatio Ordo | 55˚C per 6 horas |
| Materiae adiutoriae | Applica cum Torwell HIPS, Torwell PVA |
| Approbatio Certificationis | CE, MSDS, Reach, FDA, TUV et SGS |
| Compatibilis cum | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker et aliae impressores 3D FDM. |
| Sarcina | 1kg/volumen; 8 volumina/capsa vel 10 volumina/capsasacculus plasticus sigillatus cum exsiccantibus |
Exhibitio Modeli
Officina Officinae
Consilia Impressionis
1).Fac ut extremum filamenti post singulos usus refice, exempli gratia, extremum liberum filamenti in foramen inserendo ne filamentum in proximo usu implicatur.
2).Ut filamentum tuum vitam extendas, illud in sacculo vel arca sicca et sigillata serva.
| Densitas | 1.21 g/cm³3 |
| Index Fluxus Liquefactionis (g/10min) | 4.7 (190℃/2.16kg) |
| Temperatura Distortionis Caloris | 52℃, 0.45MPa |
| Robur Tensilis | 72 MPa |
| Elongatio ad Rupturam | 14.5% |
| Robur Flexurale | 65 MPa |
| Modulus Flexionis | 1520 MPa |
| Robur Impactus IZOD | 5.8kJ/㎡ |
| Durabilitas | 4/10 |
| Imprimibilitas | 9/10 |
| Temperatura Extrusoris (℃) | 190 – 230℃Commendatur 215℃ |
| Temperatura lecti (℃) | 45 – 65°C |
| Magnitudo Fistulae | ≥0.4mm |
| Velocitas Ventilatoris | Centum per centum |
| Celeritas Impressionis | 40 – 100 mm/s |
| Lectus Calefactus | Facultativum |
| Superficies Aedificandi Commendatae | Vitrum cum glutino, charta adglutinans, taenia caerulea, BuilTak, PEI |
Nuntium tuum hic scribe et nobis mitte.
